How soon to apply stain to a new wood deck?

How soon after building should you wait to stain a wood deck?

The answer may upset you. If you are asking this question you have likely already built your deck.

Did you leave spaces between the decking boards? How much? Without space the boards won’t dry sufficiently after rain. To get a good coat of stain on you may have to wait for a drought of 2 months or more for the moisture to escape the wood.

Pre-Stained Deck being built by Darren Smith and Crew (Upscale Decking), near Cornwall Ontario.

The best time to stain is before the deck is built. Dry, Deglaze and apply a coat of stain before you build. Sealing the end grains every time you cut will give you the longest lasting stain job.

Most of our “Builder Group Contractors” can do it, however it is a serious premium. Sometimes people opt to do the stain work themselves and then have us build the deck and end cut. You end up having to pay a little more for the extra work and ruined clothing—but that will solve the peeling stain issue.

For more information on Exterior Stain Application click here.

L

Deck and Fence Business Economics 2008

Someone asked me the other day how much money they could make—expecting me to say it is unlimited.

My answer—Well, that depends how hard you work, how good a manager you are, the local economic situation, how skilled a tradesman you are (or hire), how well you pick up the design aspects of your new job and numerous other factors.

If you rub every customer the wrong way, or show up in a Corvette to estimate a modest deck, wear a beer tee shirt to the quote, or try to sell with a phone number that folks have to dial long distance to contact you it is bound to be sluggish.

If you sell too cheap, nothing will make you a success.

Competing on price with unregistered, uninsured and illegitimate competitors is also a recipe for disaster.

Make the error of giving your company the wrong name there will not be much I can do for you

Names like Dirt Cheap Landscaping-Decks R US or you have slang words like Stuff or containing clever misspellings will often sabotage efforts to do more prestigious work or demand a fair market value for your upscale offerings.

Someone who just doesn’t have enough time to work 8 hours a day is not likely to do as well as someone putting in a full week of work.

When the economy looks tough, as it appears it may be in the coming year, you may wish to give some careful consideration to overcoming the obvious challenges.

“Shoot while the birds are in the air”, is short sighted and reactionary bit of advice. When there are no birds in the air it is bush beating time… or time to go hunting in other local bushes.

We are seeing it in Tampa. Housing has been discounted 35%, and our local builder has plenty of calls. When people can buy a house cheap—they are more willing to put money into it. Housing has always appreciated in the long term… and when you buy well you simply can’t miss.

There are more ways of looking at an entire economy even during challenging times. I have seen many people make their fortune during recession and met others that amassed a fortune during an actual Depression. In every economic circumstance someone is making money. I bet trustees, bailiffs and auctioneers are doing rather well in some areas.

Some people are defeated by difficulties—others are motivated by challenges and learn from them.

One guy may make a good living—another can build an empire but the most brilliant thing is the fact that it is your choice to make.

We are happy to be here to help you achieve your goals in 2008.

L


(For more information about our Builder Group Licensing- click here or dial 888 293 8938 and ask for Lawrence Winterburn)

Deck Builders Trends 2008 / 2009

The latest trends in the Deck Business 2008 / 2009

2006’s Trend of using IPE for decks has crashed for the main reasons of quality and price. It doesn’t arrive kiln dried so it tends to crack and twist badly as it dries. We’ve seen some poor quality stuff retailed locally and it is extremely difficult to work with.
Apparently Ipe is on the list of endangered species so we have ceased using it at all.

Lighted post caps are a trend, however built in low voltage lighting seems to be a permanent trend in the business.

When it comes to materials, Tigerdeck is the king of 2008. It is sustainably harvested from more than 40 countries and comes kiln dried with a warranty—yes, it is a hardwood and is expected to last 30 years on a typical platform.

Composites are yesterday’s news in my opinion. Azek seems to be the best of the group, it used to be Pro-Cell before being bought by another company.

Brite closed it’s doors this spring, The Dexx plant burned down a couple of years back (they were making composite from recycled gas tanks), Xtendex was closed last year and we expect a few others will do likewise due to a shrinking market for composite and increased operating costs.

Nevertheless composites are not seen as “The” premium product in the business due to aging in a chalky and simulated way. Putting plastic or vinyl outside leads to deterioration—and there is just no way around that fact.
Pre-finishing is a major trend again this year. When we can pre-finish red cedar and have it age more gracefully than composites at a competitive price to premium composites… and then refinish in 5 years and make it new again, folks understand the advantage.

Curves and Brows are a trend that won’t go away. Organic looking, free flowing decks will never go out of style.

Built in Garden Areas have always been popular. Outdoor kitchens need herb gardens—trelliswork screens need a place to root vines.

Pergolas for shade and privacy are becoming much more popular, and this year we have a new product that mounts within the pergola to create total shade and is fully retractable. Made of stainless steel and aluminum mechanicals with a 12 year warranty, they also offer a motorized version with a remote. Sunbrella fabric helps it age gracefully and resist fading. You can now shelter a 16 x 20 area from rain in a single retractable under pergola awning.

We have designed these into 4 projects so far—and are eagerly awaiting photography.

Best Wishes from GardenStructure.com

We would like to thank our Builders and Our Clients for their support and continued encouragement.

Thank you to our Fans as well as our Critics—You all help us improve and enabled us to grow into this fine Company.

Merry Christmas to Some—Seasons Greetings to all the others!

May this find you and your Families Healthy, Happy and Fulfilled at this special time of the year.

Warm Regards from Lawrence, Amanda and Everyone at GardenStructure.com

See you Next Year!

Platinum Broadcasting

Roxanne Phoenix called yesterday from Platinum Broadcasting's "Focus on America", expressing interest in our Builder Group Business Opportunity. Immediately I thought... Scam. So I asked her, are you looking for a cash payment for this opportunity to be seen on TV? How much does it cost?

Ohhh no, it's nothing like that she assured me, we are seen on cable networks all over the US--then she shut up.

I asked if they have a website...
Here's what the website header looks like. They have put a lot of work into it!



I still had my hackles up--since I had time wasted twice before by similar sounding scams.
Anyhow... she scheduled a phone interview with me for 11 am the next day. After a 15 minutes with a well-spoken guy named Mike Irving who is the producer apparent of a show called "Focus on America".

This is not the first time I have had time wasted by a scam like this one... Thank God it was only 15 minutes of my day before he asked for the $19,000 scheduling fee to cover media production, financials and scheduling.

A legitimate producer or TV production company will not ask for money up front for an appearance.

We've been featured on HomeSense, One Yard Two Looks, One Garden Two Looks. It makes for great marketing--but when you pay the production costs and there is no guarantee anyone will ever see the program... it is not such a deal.

Be cautious of these phishing scams relating to TV Production Companies.
Other names of shows they use to lure unsuspecting companies into cash donations...

Great Taste
Todays Family
Focus on America
Sustainable Planet
New Home Journal
Business & Beyond
Health Forum
Competetive Edge
Mundo Latino

If they were a legitimate production company they wouldn't be using deceptive techniques to get clients.

platinumproductionstv.com is their other website

more information on this scam can be found here

GardenStructure.com leads all Deck Companies for Traffic.

GardenStructure.com seems to be the king of all deck companies on line.

Archadeck with multi-million dollar advertising budget gets less than 1/2 of the traffic to our main site. That doesn't include blog or portfolio site.

Below is an estimation by a company that specializes in traffic ranking. They take search engine stats, toolbar information and other sources to estimate traffic. They are about 75% off in our case, so lets just assume they are 75% conservative in their numbers for everyone else too. *

To see all the estimated stats from site analytics.

And... Hickory Dickory Decks--advertised as the #2 deck company in the world... 1/10 our traffic.

80% of our locations have not had time to do a home show in the past 2 years. We are better off servicing the leads we have rather than chasing more. We just don't need the extra marketing with traffic like this.

For more information click Deck Builder Group or call Lawrence Winterburn 888 293 8938

L
*Our actual server based stats tell us that the main site peaks at over 100,000 unique visits per month.

Winter Work for Deck Builders

Our Ontario Deck Builders are being frozen out early this year. Maybe we are spoiled from last year… I think we stopped outdoor work in January around Toronto last year.

It is Tampa’s Busy season, their seasonal snowbird residents are settling in and this year their money goes about 25% further due to the stronger Canadian Loonie. (That’s dollar in American).

The new guys on the East Coast, Virginia Beach, Charleston and Greenville will should be able to work right through the winter.

Some of the seasonal area guys do interior trim and cabinetry in the winter… though we will likely be building out of doors again mid March. Rod—Our posthole guy in Mississauga-Burlington says he was digging again in mid February last year.

When it comes to the folks that made enough money to rest up over the winter… if they are smart they are working on marketing. People are shopping on line while they are cooped up for the winter—just after Christmas the traffic to our websites doubles… and by May we see many more than 100,000 unique visitors a month.

Over the winter people are printing out web pages and collecting contacts to enact their lofty spring projects. They all start calling about February or early March…first sunny day above zero. Most of our guys have a couple of projects in the bag for spring already—and they will sell more over the winter.

When builders ask when the best time to set up is—Before January is the answer. We need your pages found by the search engines in time for the winter shoppers that will be starting in January and February. Normally it takes 2-8 weeks for google to do it's thing. The more fridge doors your contacts end up on the better your spring building season will be.

The other part of it is that we have more spare manpower this time of year as well--so we can spend more time with you.

Greenville SC and Markham Ontario are being set up presently.

If you want to learn more about our deck and fence builder group—click here.

L

Word of Mouth Marketing

Salesmanship is something you can put into every word. From the initial contact to the final stroke on an agreement.

The old adage of shoot while the birds are in the air has plenty of sense in it—but what to do when the economy suffers and there are fewer birds seen?

We are seeing it where the most new migrants are, and where housing prices have tumbled and where the economy are overly reliant on the Automotive Business. There is simply less work to be done—and more people bidding on it for less.

This is the most important line in this article… “In Every Economy – Someone is making money”.

You need to connect with those people and show them the right things to ride through the economic downturn in style. “You can be one of those Someones”.

There are a few simple truths in the Deck and Fence Business.

• Selling it as a commodity is a losers game.
• Selling based on pricing decided by the competition is lunacy.
• And finally, marketing must be done consistently for financial security.
  
  Our Builder Group is growing because about a Million people see our web presence every year… It makes our builders busier and gives them many exclusive designs to show to clients that are interested in our products.
  
  Good luck in whatever economy you may be in!
  
  L

How to Build Gates - and how not to Build Gates.

Where on earth do you learn how to build wood gates properly?




I don't even recall reading decent instructions in a book, however our DIY plans include good step by step information.





Of all the tasks that a fence builder needs to know this is the Achilles heel of the trade. I see more sagging gates with the hardware inoperable in my travels than any other flaw in wood fences.




Wooden gates require a brace and braces work in compression (see photo above). I see a million braces (right idea), with the braces backwards. The braces must run from the swing side of the gate down to the hinge. This builder got the braces right--however he built the gates too large and the gates are inoperable.



There are brackets--that don't work particularly well and many react with the chemicals in ACQ Rated pressure treated materials.



When a wood gate is not hung off a wall you will need a headpiece to prevent the weight of the gate from bending the post and causing the hardware not to work--and the gate rubbing on the other post.







There is a maximum size for gates that don't have steel reinforcement--that is advanced information that we share with our Builder Group.













These gates are all on the same block (cheap copies of a fence I designed this summer).






This one has no headpiece--no brace--and it is built too large for the opening that doesn't seem to be the same size top and bottom. This gate incorporates nearly every mistake in the book.






The garbage beside it is a nice touch.



There should also be a good space beneath the gate so that it doesn't get obstructed. There are many rules for yards with pools to do with gate operation direction, self closing hardware and climb ability so consult with your local building department before deciding on a fence style.





Here's a nice looking gate --However it won't last due to;


No head piece.



Diagonal bracing is insufficient--little blocks in the corners won't do it.



The frame seems to be hanging on screws. Screwing through the long face of a 2x4 doesn't work very well--the wood shrinks, play develops and the gate begins to come apart.



I don't think there is an inch of space to allow this gate to swing.



If I were the client I would complain about the concrete all over the posts.

The gate is also too close to the ground... and will pinch when frost or clay heave lifts the ground.

The above examples illustrate why wood fencing is a commodity. Poorly trained contractors running around cobbling things together the best they can, not knowing what crown is, not having the know-how or skill to build something properly can not ask for proper pay.

If you wonder why GardenStructure.com licensed contractors charge a little more--it's because they simply do better work, that lasts longer and ages more gracefully... oh, and our gates work properly.


Below is a set of wood gates built by Tony Fredericks - WoodCrafters in Toronto, Ontario.



The braces are on the interior for a clean look, there is clearance for swing and they work well. The headpiece carries the weight of the gates. 10/10




L

New Fence Design for Suburbia

A new Wood Fence for suburbia. Roughly the same price per foot as a good neighbour 5+1 lattice topped fence, just a little better looking. Our contractors have hundreds of details to work designs from--and new ones are always being released. 30 pages will be added to the Design Elements Package for our Builder Group this winter.
Notice the space beneath the fence so that frost does not lift the panels out of the ground.

Simple understated gates with a tasteful headpiece that maintaines posts vertically under the weight of the gates. There's a clear 1" of space between the gates and the braces are on the interior--transferring the hinge from the swing side down to the hinges. This prototype was Built by our Top Crew in Toronto "Tony Fredericks- Woodcrafters Inc." Nice work Tony.

L

Free Pergola Plans

Dear Lowes ;
Thanks for the free pergola plan pictured.

I tried to use your on line form--however it was inoperable. It apparently didn't like my name, postal code or email address. I have instead posted my feedback form here. Hopefully someone with Lowes will find it.

Regarding your free on-line pergola plan.
#1 problem, no lateral strength
#2 floating footings and attached to the dwelling--one or the other. Attach it to the dwelling and you may damage that dwelling and be libel for the damage when they follow the "free" plan...waiver or not.
#3 What is the point in supplying a plan that no one will ever build? It is too ugly.

I own http://www.gardenstructure.com/

Have a look at our pergola plans, they are not free--but lots of people actually build them and send us photos. Our best designs are for our builder group only...after a few years when they have new designs we retire them and offer them as DIY and Professional Level Plans.

I can only imagine how much you paid a graphic artist to develop this free plan for you... I am sure it was expensive. As a woodwork designer and a master carpenter I am going to speak very plainly and I apologise in advance if my words seem hurtful or coarse. Your outdoor woodwork plans are about the worst I have ever laid eyes on.

Building something from them would surely end up in disaster-and with the way they look they just shouldn't be built. Ever. I could shoot holes in your plans for an hour or two if you want--but I believe that to be unproductive. I see no potential for success working from what you have.

The trouble is that inspired details are an absolute nightmare even for seasoned tradesmen to develop, (I guess that is why our Builder Group is growing so quickly--they get great details that have taken over 20 years to create).

In my not so humble opinion, Lowes owes it to their shareholders to explore the possibility of GardenStructure.com developing their woodwork plans in the future.

Kindest Possible Regards,
L

Trex - Defective?

I wouldn't want to be in the composite decking business this year. Costs have about doubled for raw material, trucking is higher and the Canadian manufacturers have seen their currency jump about 40% in the last year. They are calling our dollar a commodity indicator because it just doesn't make sense.

We are going to take a look at the Trex warranty soon, I just want to try to keep the majority of posts positive--so sorry, there is less space for composite info at the moment. I'd love to see some positive info about composites, but there seems to be a shortage of late.

What I know about Trex is that they tell us that Mold is not covered by their warranty because it is environmental in source. What I know for certain is that pulp lumber (like what is ground up into trex), gets slimy and mold covered when left for a few weeks in a pile outside your back door. Just a coinkidink.

Here's the headline--

Nov. 6, 2007, 7:48AM

3Q Loss for Deck and Fence Maker Trex

© 2007 The Associated Press

WINCHESTER, Va. — Trex Co. Inc., which makes decking, railing and fencing products, said Tuesday it swung to a loss in its third quarter due mainly to a large reserve for replacing defective decking material manufactured at one of its plants.

...Trex said its profit was hurt by a $45 million increase to a product defect reserve for the replacement of decking material manufactured at its Nevada plant between 2003 and 2006 and a $9.4 million inventory adjustment...

To read the whole story please click this link http://www.chron.com/disp/story.mpl/ap/fn/5277086.html

Now, what was wrong with the materials leaving that plant if they don't see mold as a problem?

Yikes. L

ps. To read more about Composite Decking issues (click)

Deck Inspections - Another Failing Grade

More often than you expect we get calls from pensive clients asking strange questions about what they should reasonably expect when it comes to decks and fences.

Yes, your gates should operate without jamming--there should be an inch of clearance, yes, it should have a brace. No, your deck should not have black spots all over it, no, it shouldn't sag between the joists.

I've received enough of these calls in the past that a few times a year I am inspecting the competition's work and preparing a report to arm the client with a definitive list of deficiencies to negotiate with the contractor.


Now, I will preface this by saying, I know what these people paid for this deck, and it was a low-ball or "Cheap" price.

In the above shot you will see the most common design flaw in decks. An 11 inch step outside a door and marks on the wall where the previous deck was. It is dangerous and certainly a tragic flaw since it makes the deck feel uncomfortable as you enter.

Taking a peek at the substructure the skirting touches the ground which means that it will lift the deck off the footings as the frost sets in.


Second issue is the strange footing... two footings to support one post. Since I viewed this I have been trying to imagine a situation where I would do this. I am still trying.



At least they put gravel and a drop sheet down.



The post to footing connection and beam to post connection are a long way from secure.





Now, Hand rails are a pretty important part of any deck.



These guys used "A cedar 2x4, top and bottom" and called it a hand rail. Zoom forward a few years. When you toenail a 2x4 into a 4x4 post and it starts to rot... it eventually falls off.



As well when you lay a 2x4 on the flat and span 42" it will sag in short order. The bottom member of this rail will not support the glass. A hand rail is not a picture frame. It could also be called a safety rail...certainly when it is 8' off the ground.

The trims are simply 3/4" x 3/4" cedar fastened with brad nails.



I wouldn't want to be the one to trip towards this rail and have to rely on it. This deck rail would never pass an inspection by the building department. It would never receive a stamp from an engineer. Any contractor that would knowingly install this hand rail and charge the client for it is simply a negligent greedy pig . If you don't know how to build a hand rail...research and find out. Laziness is no excuse for putting people in danger.


Now, this is my pet peeve of 2007. They changed the formulation for pressure treated materials a couple of years back. ACQ is now the standard and it eats steel fasteners within a couple of years.



ACQ fasteners are "Double Galvanized" to withstand the corrosion caused by ACQ pressure treated materials which this deck frame is made from. "ACQ FASTENERS DO NOT RUST IN THE ELEMENTS". This means that within a couple of years these fasteners will not be holding themselves into the pressure treated frame. The deck will fall to pieces.



Metal reacts with the tannins in Red Cedar to cause black staining throughout the entire thickness of the wood, causing a stain that can NEVER be removed.



These guys cleaned up all the materials from the deck, (which left a perfect outline on the lawn of dead grass), and left the box of what they fastened the decking to the ACQ rated under structure. Ouch...



"Ummm, I used fasteners that will turn to dust in 2 years...but can I have my check now?"



This is one of the largest deck companies in the Toronto Area. They have a website and I know one of their managers personally. I don't want to provoke a law suit so I am not going to name them but what I will tell you is that this deck is just off Avenue Road, south of the 401 and they do a lot of work in the area.


The lowest price is rarely the best deal.



L

Levers and Structural Engineering

Here's a nice demonstration as to how to push two little 8" footings into the ground. Add some more people and some rain--and it should successfully push the whole post into the ground too.






These folks must be part time engineering students!

My theory is that it will take more than that diagonal board to keep this deck on this house. They cantilevered the beam about 3' as well. If they don't put up a fence right away maybe I can get some after shots too.

In general, you can cantilever about 12" on 2x8 joists, and about 16" on 2x10 joists. When you get around the 4' mark on 2x8 joists you are going to see some interesting things happen... like wavy big decks, jiggly little decks. Could be entertaining--but mostly dangerous.

Did you notice the cleat type stairs?

L

Red Cedar vs White Cedar

Is it a White Cedar fence? Or is it Red Cedar?

Northeastern United States and Central and Eastern Canada has locally grown Cedar, Eastern White Cedar or Northern White Cedar—but the real “Western Red Cedar” is a very different material for a couple of different reasons.

Long lasting outdoor materials grow in a rainforest climate. When a species adapts to deal with excess moisture in the environment it makes it longer lasting in dry climates. Take red cedar or Douglas fir to Ontario or Michigan and it will last 20-30 years depending on the detailing.

The “White Cedar” that grows locally here has a very similar appearance however it is a much smaller tree. The larger the tree, the more stable the grain and the more high quality material is hewn from it. “Old Growth Red Cedar” is often a few feet in diameter. “White Cedar” can get up to about 15” in diameter. “Second Growth Red Cedar” is normally harvested at 15-25” which means that even farmed red cedar will be superior material. It will crack less and twist less if the material is straight grained.

Many builders are selling cedar fences for $25-40 per running foot all over the northwest. This is “Eastern White Cedar”. An eastern white cedar can be expected to last 5-10 years.

When materials have to be trucked 1500+ miles and go through a Distributor, Broker and Lumber Retailer before your contractor sees it you are looking at about $30+ for materials to build a basic red cedar fence which means that depending on design you are looking at considerably more than $25.00 per running foot.

Photos: Top is Juvenile Eastern White Cedar Bottom is Western Red Cedar

White cedar is a yellowy beige in colour, Red Cedar is more of a red colour. Aside from that, the face grain is very similar so looking at the end grains is the best way to identify--the white cedar will normally have the core of the tree in nearly every piece of lumber. Red Cedar may have the core of the tree in about 10% unless it is of an extremely low grade.

Sometimes a Cedar Fence is not a cedar fence. Sometimes folks that believe they are getting a steal—are not getting exactly what they expect.

L

Sources of photos: http://www.fs.fed.us/ipnf/eco/yourforest/trees/cedarphotos.html

http://www.macphailwoods.org/tree/whitecedar.html

Incredible Growing Fences

Why do fence posts lift? Here’s an illustration.




Too much concrete… if the concrete is at the top of the hole, it is shaped in a perfect way for frost to lift it out of the ground at a rate of nearly an inch per year in some cases.

Realistically it doesn’t matter whether the concrete is in the ground 32” or 42”, when you dig a hole the top of the hole is normally larger. Frost sets in from ground level downwards and moisture expands as it freezes—therefore the ground rises.

Solution: KEEP THE CONCRETE IN THE BOTTOM PART OF THE HOLE ONLY!

Are you ready for the irony? Yes... this fence is surrounding a Municipal Services Yard -- in a township north of Toronto. Municipal services take care of things like fence repairs etc.

If anyone should know better--It is them.

L

Questions about Starting a Fence Business.

I received an email this morning...

Hello, my name is Samantha and I live in Oklahoma City. I found your
website on google under starting a fence business. I was hoping you could give
me some advise on starting a fence business? My husband is Michael and
has been in the fence business for over 10years, and wants to get started on his
own. He does amazing work and I am trying to find out all I can to help him.



Thanks So Much
Samantha (last name filtered)

"The above photo is of a recent creation designed by David Boyle--Our Toronto Small Job Specialist."
Like any business, feasibility is king, so this advice would fit for nearly any business.

Hi Samantha,

Advice for new fence business...

Put away some cushion money to hedge against unforseen factors.

Having 2 people working takes the stress away during the first few months...

Take basic sales training course, (most of it is hype--but there are a few basic sales principles that will serve you well to learn).

Create a business plan and have it critiqued by your banker and or friends in business. Listen to what they say.

Don't fall in love with an idea...be objective.

Go and work for your top 3 competitors...even if you work for a low wage in the beginning--even if only for a week or two.

Analyze your competition before pulling the trigger. What will be your advantage over them... why will you prevail? You need good answers to thrive in business.

We have set up the "Builder Group" to help folks like you just starting out. It helps you with everything from sales, product line, marketing and even makes your phone ring.

Give me a call if you would like more info!

Hope this helps--

L

(Lawrence can be reached at 888 293 8938)

Lawrence is Back--

Every year I think--"This summer I will take some time with the family and will have plenty of time for writing"-- The writing had to be dispensed with. As usual we were inundated with interesting work to design and build. I had to lapse the writing in favor of taking care of the guys that needed help so please forgive.

In the weeks to come you will see shots of some of our new projects and the website will get a new look, and you will meet some of the new guys. Ohh... and we will be looking at some of the competition's work--with brutal critiques.

Here's a funny one for you. I was getting gas the other day--in the next row there was a deck builder. I asked him for a card--wouldn't you know it, he featured a deck I had built 14 years before on his card. Oops.

Stay tuned!

L

What makes a Better Deck Builder?

Exterior Laminations that last-- Here are spy shots--you will have to tune in later to see what the projects look like finished...

The first is a job by Tony Fredericks in Etobicoke:

It is a pair of curved trelliswork screens. There's roughly 12 curved pieces per screen and we've glued them up in 2 days (including layout).

The second job is by Kevin Murrell in Niagara;

It is a new pergola design that can clear span 20+ feet.

Drop by in a month or two to see what these projects look like.

BTW, it will be weekly posting for the next few weeks. I am up to my elbows in design work and rebuilding the website to work better as well.

Happy building!

L

Making a House or Deck Fall Down

In my travels I see many things that astound me, that's why I keep my camera close by.




These folks were apparently renovating their own home--since the guys in texas can flip this house I guess these folks thought it was a good idea. When you remove all the sheathing, brick cladding and drywall from the inside the home is very likely to flip --over onto the lawn.

There is no empathy to be found for these half wits here, it is the most basic principal. Without lateral bracing--sheathing, let in bracing or cable bracing (for larger buildings), the structure will fall down. If you don't know what you are doing--stay away from houses.

Driving by on Highway 92 near Elmvale Ontario my eye was drawn by a yellow van and some boys disassembling a big pile of pressure treated lumber. Ouch. I had to stop and chat with the guys and as it turned out the owner was there.

He said it was an aquaintence that built the deck for him--he was cheap and the owner knew his dad once upon a time. On first glance aside from the lack of joist hangers it doesn't look that bad.
It was obviously a low bid--and he simply couldn't afford the time to fasten anything properly. Notice the gas line beneath the deck.

When you look a little closer the ledger is fastened about every 3' with a half inch sleeve anchor--though not a terrible detail, look at the placement of the anchor. It is 1" from the top of the ledger, which means the whole deck is held up by a 2x2.

When you look a little closer you will notice that the joists are simply toenailed in with 3 galvanized spikes.

So, here is the paraphrased account from the owner. His kids were up at the house when they heard a loud crunch. The snow and ice had slid off the metal roof and landed on the deck. A few moments later the deck collapsed. The pipe beneath the deck--gas line for the bbq.

Kids get out of the house and call 911 because of the gas leak.

First Volunteer Fireman to arrive is overcome by gas trying to find the shut off.

Second nearly Succumbs to gas removing the first fireman.

Closest homes are evacuated.

So, this poorly built deck nearly cost a few lives and if there was a spark, the home would have been gone as well. This is the kind of thing that the building department is there to prevent--it didn't work too well this time.

Before the BCIN requirements came into force 90% of decks were built without a permit. Now it is closer to 95%.

Many builders and Government officials seem to be lacking some common sense of late.

L